The (E)-2-hydroxy-5-(aryldiazenyl) benzaldehydes (azo dyes 1–4 ) were synthesized in high purity. As they are insoluble in water, the usual analytical methods cannot be utilized to determine their pKa values. Cyclic voltammetry was experimentally used to determine their pKa values in DMSO solvent. In addition, computational methods and a conductor-like screening model (COSMO) were used to calculate the solvent effect. , , Kexchange, and pKa values were estimated for the azo dyes being studied using the BP86, TPSS, B3LYP, PBE0, TPSSh, and PW6B95 density functionals in def2-TZVP basis sets. The obtained mean absolute deviations (MADs) indicate that the results of BP86, PBE0, and PW6B95 functionals are in good agreement with experimental values. 相似文献
The electrochemical fiber coating (EFC) technique was used for the preparation of dodecylsulfate-doped polypyrrole (PPy-DS), and applied as a new fiber for solid-phase microextraction (SPME) procedures. PPy-DS film was directly electrodeposited on the surface of a platinum wire from an aqueous solution containing pyrrole and sodium dodecylsulfate, using cyclic voltammetry (CV). The effect of polymerization conditions and type of dopants on the thermal stability, adhesion and extraction characteristics of the fiber were investigated. The electron microscopy imaging of PPy-DS film suggested that the surface fiber coating was well-distributed with a porous structure. The fiber coating can be prepared easily in a reproducible manner, and it is inexpensive and has a stable performance at high temperatures (up to the 300 degrees C). The extraction properties of the fiber to eight polycyclic aromatic hydrocarbons (PAHs) were examined, using a headspace-SPME (HS-SPME) device coupled with gas chromatography-flame ionization detection (GC-FID) and gas chromatography-mass spectrometry (GC-MS). The results revealed study shows that PPy-DS as a SPME fiber coating is suitable for the successful extraction of PAHs. The effects of the extraction parameters including exposure time, sampling temperature, salt concentration, and stirring rate on the extraction efficiency have been studied. A satisfactory reproducibility for extractions from spiked water samples at PPb-level with R.S.D. < 7.6% (n = 7) was obtained. The calibration graphs were linear in the range of 0.5-100ng ml(-1) and detection limits for the selected PAHs were between 0.05-0.16 ng ml(-1). Comparing the HS-SPME results for extraction and determination of PAHs using PPy-DS fiber with the corresponding literature data using PDMS fiber shows that the proposed fiber has a better detection limit for low molecular weight PAHs. The life span and stability of PPy-DS fiber is good and it can be used more than 50 times at 250 degrees C without any significant change in sorption properties. 相似文献
A new definition of monotone bifunctions is given, which is a slight generalization of the original definition given by Blum and Oettli, but which is better suited for relating monotone bifunctions to monotone operators. In this new definition, the Fitzpatrick transform of a maximal monotone bifunction is introduced so as to correspond exactly to the Fitzpatrick function of a maximal monotone operator in case the bifunction is constructed starting from the operator. Whenever the monotone bifunction is lower semicontinuous and convex with respect to its second variable, the Fitzpatrick transform permits to obtain results on its maximal monotonicity. 相似文献
Novel magnetic titanium dioxide nanoparticles decorated with methyltrimethoxysilane (Fe3O4@TiO2‐MTMOS) were successfully fabricated via a sol–gel method at room temperature. The synthesized material was characterized using Fourier transform infrared spectroscopy, X‐ray diffraction, scanning electron microscopy, energy‐dispersive X‐ray spectroscopy, thermogravimetric analysis and vibrating sample magnetometry. The removal efficiency of the adsorbent was evaluated through the adsorption of methylene blue (MB) dye from water samples. The adsorption isotherm and kinetics were evaluated using various models. The Langmuir model indicated a high adsorption capacity (11.5 mg g?1) of Fe3O4@TiO2‐MTMOS. The nanocomposite exhibited high removal efficiency (96%) and good regeneration (10 times) compared to Fe3O4 and Fe3O4@TiO2 at pH = 9.0. Based on the adsorption mechanism, electrostatic interaction plays a main role in adsorption since MB dye is cationic in nature at pH = 9, whereas the adsorbent acquired an anionic nature. The newly synthesized Fe3O4@TiO2‐MTMOS can be used as a promising material for efficient removal of MB dye from aqueous media. 相似文献
Roughness of surface has as an important influence on identifying the mechanical behavior and performance of crystalline metals. In this study, nanoindentation simulations are conducted by the two dimensional quasicontinuum method to determine the load–penetration response and the critical load associated with the onset of plasticity in rough surfaces of a face-centered cubic single crystal copper. The arithmetic roughness index, ranging between 2 and 13 Å, is used to specify the roughness of surface. Results of indentation with different roughnesses are in good agreement with previous studies for the indenter size of 10–140 Å. The resultant load–penetration scattering, which stems from the roughness, indicates different dislocation nucleation steps, different subsequent dislocations intervals and varying stiffness values of samples. It can be concluded that the surface roughness has a significant effect on the first dislocation emission because of the indenter position and surface interactions beneath it. Moreover, the critical penetration depth for the first dislocation emission increases by the increase of the contact area between the indenter and surface.
Physics of the Solid State - Zeeman spectroscopy is used to demonstrate that phenomenological crystal-field parameters determined for the two C1 point-group symmetry sites in Er3+:Y2SiO5 may be... 相似文献
Hydrogen peroxide/MoO3, as an efficient and clean oxidizing system was used to afford diasteroselective oxidative cyclization of bisnaphthols to spirans in ethanol at 60 °C with high yields. Bisnaphthols were prepared by the reaction of a series of aldehydes and 2-naphthol in the presence of a catalytic amount of H3[P(Mo3O10)4].nH2O (HPa) in refluxing dichloromethane. 相似文献
An efficient, one‐pot synthetic protocol for polyfunctionalized 1,4‐dihydropyridine‐fused‐1,3‐diazaheterocycles, a class of biologically active compounds, starting from 1,1‐bis(methylthio)‐2‐nitroethylene, 1,n‐diamine, arylaldehyde, and malononitrile is described. The reactions are completed within 12–15 h under refluxing conditions and in the presence of 10 mol % of piperidine as a basic catalyst to produce the title compounds in 60–75% yields. 相似文献